WER-D048/30

기술문의 : 웰콘시스템즈 공식대리점 앱솔루텍
전화 : 032-719-4966 ~ 9
팩스 : 0504-984-4316
이메일 : solu@abtech.co.kr

STANDARD SERVO DRIVE 30A

WER-D048/30-FS04F7-E

 Ratings30
Continuous Output Current A rms30
Peak Output Current A rms60
확대

- Specifications

Basic Specifications
Motors
DC / BLDC / PMSM / VCM
 Rotary servo motors, Linear servo motors
Current(Torque) ControlControl Periodic 24KHz
Control Loop PI + Feed-forward
Velocity & Position Control Control Periodic2KHz
Control Loop Cascade P/PI + Feed-forward 
FiltersFirst order low pass filter, Four notch filters,
First order adaptive windowing filters
Reference Command Current / Velocity / PositionUSB, CAN(CANopen), EtherCAT(CoE,FoE), RS-485
Auto Tuning MethodAutomatic self-configuration and optimization of motor phasing, wires, current loop, velocity control loop
GUIUser Interface WELSS(WelconServoStudio), Setting, Drive, Motor, Feedback, I/O, Motion 
Input Voltage 12~48VDC
Protective Functions Under- and over-voltage, Over-current, Over-load(with I2T), Drive over-temperature 
Environment • Ambient temperature : Operation 0~50℃, Storage 0~70℃ • Humidity : 10~90% • Vibration : 1.0g
ComplianceCE,KC 
확대
Communication
Feature Specification 
CAN Bit rate : 125kbps ~ 1Mbps
EtherCAT100Mbps, Communication cycle time : up to 500us(CSV,CSP mode), up to 250us(CST mode)
USB • Baud rate : up to 3Mbps • Maximuma bcle length : 3m 
RS-485Baud rate : 9200bps ~ 3Mbps
확대
I/O
FeatureSpecification
Analog Input Quantity1
Voltage RangeAnalog ±10 VDC differential
Input Resolution14bit
 Digital InputsQuantity 6
SignalConfigurable. Opto-isolated
Voltage24V 
Digital Outputs Quantity2
SignalConfigurable. Opto-isolated. 
Voltage24V 
Max. Output Current40mA 
BrakeUse one of digital outputs (40mA)
확대
Motor Feedback*
FeatureSpecification
GeneralSupply Voltage5VDC
Incremental EncoderSignal CH1 : A-quad-B with or without index, RS422, Differential
CH2 : A-quad-B with or without index, Single-ended
A-quad-B Max Input Frequency10MHz (before quadrature)
Digital Hall SensorSignalSingle-ended
TypeSeparated hall sensor
Analog Hall Sensor*Signal0~5V, Single-ended
Sampling Frequency24KHz
Sin/Cos Encoder*Signal-0.7 ~ +0.7V at 2.5V, Differential
Sampling Frequency24KHz
Serial Encoder TypeSSI, Biss C, TAMAGAWA, Panasonic, Endat2.2
Bite rate0.5Mbps, 1Mbps, 2Mbps, 2.5Mbps, 5Mbps
확대